Removing Multiple Graphics Cards; Prerequisites; Procedure - Alienware Area-51 Threadripper Edition R7 Service Manual

Removing multiple graphics cards

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the stability
2 Remove the left and right side-panels. See

Procedure

1 Lay the chassis on the right side. Locate the graphics card on the system board. For more information on graphics card see
"system-board components".
2 Lift the graphics bridge that connects the graphics cards.
3 Disconnect the power cables from the graphics card.
4 Rotate and open the PCIE door.
5 Press and hold the securing tab on the clamp.
62
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
foot.
"Removing the side
computer. After working inside your computer, follow the instructions
panels".