Removing The Bottom Tron-Lighting Cable; Prerequisites; Procedure - Alienware Area-51 Threadripper Edition R7 Service Manual

Removing the bottom tron-lighting cable

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the stability
2 Remove the left and right side-panels. See
3 Remove the top fan.
4 Remove the PCI fan.
5 Remove the handle bars.
6 Remove the front bezel.
7 Remove the rear bezel.
8 Remove the base panel.

Procedure

1 Disconnect the bottom tron-lighting cables from the logo board.
2 Open the securing clip which secures the bottom tron-lighting cables to the chassis.
3 Remove the bottom tron-lighting cables from the routing guide on the chassis.
124
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
foot.
"Removing the side
computer. After working inside your computer, follow the instructions
panels".