Table of Contents
Advertisement
Replacing the handle bars
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Procedure
1
Align and place the bottom-handle bar on the slot and snap the bottom-handle bar to the chassis.
2
Replace the seven screws (#6-32x6.5) that secure the bottom-handle bar to the left side of the chassis.
104
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions
Advertisement
Table of Contents
