Removing The Side Panels; Procedure - Alienware Area-51 Threadripper Edition R7 Service Manual

Removing the side panels

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Procedure

NOTE: Make sure that you remove the security cable from the security-cable slot (if applicable).
1 Remove the screw (M2x3) that secures the security-cable slot latch.
The security-cable slot latch slides to the unlocked position.
2 Lift the release panel to open the right side-panel.
3 Pull and lift the right side-panel away from the chassis.
4 Repeat the procedure from step 2 to step 3 on the left side-panel.
28
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions