Table of Contents
Advertisement
Replacing the front bezel
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Procedure
1
Align the tabs from inside the chassis on the right and left side and place the front bezel and snap it in place.
2
Connect the top tron light-cables to the front bezel.
3
Connect the bottom tron light-cables to the front bezel.
4
Replace the screw (6-32x5.2) from inside, securing the front bezel to the right side of the chassis.
110
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions
Advertisement
Table of Contents
Need help?
Do you have a question about the Area-51 Threadripper Edition R7 and is the answer not in the manual?
Questions and answers