Table of Contents
Advertisement
Replacing the battery case
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the battery case with the screw holes on the chassis.
2
Replace the two screws (#6-32x5.2) that secure the battery case to the chassis.
3
Route the battery-case cable through the routing guides on the chassis.
4
Connect the battery-case cable to the I/O board.
Post-requisites
1
Replace the battery.
2
Replace the right side-panel. See
3
Replace the
stability
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
"Replacing the side
foot.
computer. After working inside your computer, follow the instructions
panels".
33
Advertisement
Table of Contents
