Removing The Antenna Cables; Prerequisites; Procedure - Alienware Area-51 Threadripper Edition R7 Service Manual

Removing the antenna cables

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the stability
2 Remove the left and right side-panels. See
3 Remove the handle bars.
4 Remove the graphics
5 Remove the wireless
6 Remove the front bezel.
7 Remove the rear bezel.

Procedure

1 Lay the chassis on the right side.
2 Disconnect the antenna cables from the wireless card.
3 Remove the antenna cables from the routing guide on the chassis.
4 Slide the antenna cables through the slot on the chassis.
5 Turn the chassis over.
6 Remove the antenna cables from the routing guide on the chassis.
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
foot.
"Removing the side
card.
card.
computer. After working inside your computer, follow the instructions
panels".
127