Replacing The Memory Modules; Procedure; Post-Requisites - Alienware Area-51 Threadripper Edition R7 Service Manual

Replacing the memory modules

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Procedure

1 Align the notch on the bottom of the memory module with the tab on the memory-module slot.
2 Insert the memory module into the memory-module connector until the memory module snaps into position and the
securing clip locks in place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.

Post-requisites

1 Replace the left and right side-panels. See
2 Replace the stability
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
"Replacing the side
foot.
computer. After working inside your computer, follow the instructions
panels".
57