Table of Contents
Advertisement
Replacing the logo board
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the logo board to the screw holes on the bracket and slide the logo board in place.
2
Replace the six screws (#6-32x6) that secure the logo board to the bracket.
3
Slide the logo board inside the chassis.
4
Replace the screw (#6-32x6) that secures the logo board to the bracket.
74
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
computer. After working inside your computer, follow the instructions
Advertisement
Table of Contents
Need help?
Do you have a question about the Area-51 Threadripper Edition R7 and is the answer not in the manual?
Questions and answers