Replacing The Base Panel; Procedure; Post-Requisites - Alienware Area-51 Threadripper Edition R7 Service Manual

Replacing the base panel

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Procedure

1 Align the tabs from inside the chassis on the right side and left side, securing the base panel to the chassis and snap it in
place.
2 Replace the two screws (#6-32x6) from inside, securing the base panel to the right side of the chassis.
3 Replace the three screws (#6-32x6) from inside, securing the base panel to the left side of the chassis.
4 Replace the four screws (#6-32x6) that secure the base panel to the chassis.

Post-requisites

1 Replace the hard drive
2 Replace the battery
3 Replace the left and right side-panels. See
4 Replace the stability
120
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
(HDD1).
case.
"Replacing the side
foot.
computer. After working inside your computer, follow the instructions
panels".