Removing The Handle Bars; Prerequisites; Procedure - Alienware Area-51 Threadripper Edition R7 Service Manual

Removing the handle bars

WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in After working inside your
www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the stability
2 Remove the left and right side-panels. See

Procedure

1 Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the left side of the chassis.
2 Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the right side of the chassis.
100
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
foot.
"Removing the side
computer. After working inside your computer, follow the instructions
panels".