Removing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the stability foot. See
2
Remove the left and right side-panels. See
3
If you have multiple graphics cards installed, remove the graphics card. See
"Removing multiple graphics
Procedure
1
Lay the chassis on the right side.
2
Disconnect the antenna cables from the wireless card.
3
Remove the screw (M2x3) that secures the wireless card to the chassis.
86
computer. After working inside your
After working inside your
"Removing the stability
"Removing the side
cards".
foot".
panels".