Table of Contents
Advertisement
Removing the top fan
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in
in
After working inside your
www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
stability
2
Remove the left and right side-panels. See
Procedure
1
Lay the chassis on the right side.
2
Disconnect the top-fan cable from the connector on the system board. For more information on the top-fan cable
connector, see
"system-board
3
Remove the screw (#6-32x6) that secures the top fan on the chassis.
4
Pull the release tab away from the chassis, move the top fan towards the right side and slide the top fan out of the chassis.
70
Before working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
foot.
"Removing the side
components".
computer. After working inside your computer, follow the instructions
panels".
Advertisement
Table of Contents
