Replacing The Battery Case; Procedure; Post-Requisites - Alienware Area-51 R3 Threadripper Edition Service Manual

Replacing the battery case

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Align the screw holes on the battery case with the screw holes on the
chassis.
2 Replace the two screws (#6-32x5.2) that secure the battery case to the
chassis.
3 Connect the battery-case cable to the I/O board.

Post-requisites

1 Replace the battery.
2 Replace the right side-panel. See
3 Replace the stability foot.
computer. After working inside your
After working inside your
"Replacing the side panels".
41