Table of Contents
Advertisement
Replacing the Battery Case
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before Working Inside Your
Working Inside Your
regulatory_compliance.
Procedure
1. Align the screw holes on the battery-case with the screw holes on the chassis.
2. Replace the screws that secure the battery-case to the chassis.
3. Connect the battery-case cable to the chassis.
4. Insert the batteries and close the battery-compartment door.
Post-requisites
1. Replace the right side-panel. See
2. Replace the
stability
foot.
Computer. After working inside your computer, follow the instructions in
Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/
"Replacing the Side
Panels".
After
25
Advertisement
Table of Contents
