Replacing the front bezel
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1. Align and insert the front bezel tabs into the front panel slots.
2. Rotate the front bezel towards the chassis until the front bezel tabs snap into place.
Post-requisites
1. Replace the
top
cover.
2. Follow the procedure from step 4 to step 5 in
3. Replace the
right-side
4. Replace the
left-side
cover.
computer. After working inside your computer, follow the instructions in
"Replacing the optical
cover.
drive".
After working
www.dell.com/
83