Composite Video; S-Video Selection - Barco BARCOIQ GRAPHICS 200L Owner's Manual

5.3 Composite Video

How to select one of the 7 composite video inputs ?
1. Press MENU to activate the Toolbar
2. Press ↓ to Pull down the Source Selection menu
3. Use ↑ or ↓ to select Composite video
4. Press → to Pull down the submenu
5. Use ↑ or ↓ to select one of the different video inputs (image 5-3)
Note: Video2 is an optional Video input and is only displayed in case the optional Video/Audio layer is installed.
If the extended mode is disabled, the submenu contains only 1 selection (2 selections if the Audio & Video option is
installed), see The Video Selector, page 44
6. Press ENTER to confirm your choice
A white bullet indicates the selected composite video source which now appears on the screen.
Image 5-3
The composite video sources can also be selected using the video selector or via the dedicated key 3 on the
RCU. Key 3 allows to browse through the active video inputs.

5.4 S-Video selection

How to select one of the 3 S-Video inputs ?
1. Press MENU to activate the Toolbar
2. Press ↓ to Pull down the Source Selection menu
3. Use ↑ or ↓ to select S-Video
4. Press → to Pull down the submenu
5. Use ↑ or ↓ to select one of the different video inputs (image 5-4)
Note: S-Video4 is an optional Video input and is only displayed in case the optional Video/Audio layer is installed
If the extended mode is disabled, the submenu contains only 1 selection (2 selections if the Audio & Video option is
installed), The Video Selector, page 44
6. Press ENTER to confirm your choice
A white bullet indicates the selected video source which now appears on the screen.
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
5. Source Selection
43