Runtime Warning - Barco BARCOIQ GRAPHICS 200L Owner's Manual

How to reset the lamp runtime ?
1. Press MENU to activate the Toolbar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Reset runtime
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the lamp to be reset (image 10-8)
7. Press ENTER
A dialogbox is displayed (image 10-9)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
Image 10-8
Image 10-9
Lamp runtime reset as well as the lamp replacement can only be done by a Barco authorized technician.

10.6Runtime warning

What can be done ?
When the lamp has reached a certain predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
How to set the lamp runtime warning?
1. Press MENU to activate the Toolbar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Runtime warning (image 10-10)
5. Press ENTER
A dialogbox is displayed (image 10-11)
6. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
10. Lamp Menu
85