Barco BARCOIQ GRAPHICS 200L Owner's Manual page 89

Image 10-4
Single mode operation: switching principle
Dual mode
Both lamps are working.
When one lamp fails, the projector continues the projection using the remaining lamp.
How to select the lamp mode ?
1. Press MENU to activate the Toolbar
2. Press → to select the Lamp item
3. Press ↓ to Pull down the Lamp menu
4. Use ↑ or ↓ to select Mode
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired background (image 10-5)
7. Press ENTER
A bullet shows the active mode.
Image 10-5
When switching from the dual mode to the single mode the lamp with the longest runtime is switched off.
If the runtimes are equal (if the projector has always been operated in dual mode) then lamp1 is switched out.
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
10. Lamp Menu
83