Freeze; Standby Timer - Barco BARCOIQ GRAPHICS 200L Owner's Manual

6. General Menu
How to interrupt the image projection ?
1. Press MENU to activate the Toolbar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Pause (image 6-2)
5. Press ENTER to activate the Pause function
A brief sound indicates that the shutter has been activated.
Image 6-2
The image projection can also be interrupted using the PAUSE key on the RCU.
To restart the image : press PAUSE, MENU, BACK or LOGO

6.3 Freeze

Freezing the image
With the Freeze function, the image can be frozen.To restart the image, reuse the Freeze function or press the FREEZE button on
the remote.
How to freeze the image ?
1. Press MENU to activate the Toolbar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Freeze (image 6-3)
5. Press ENTER to activate the Freeze function
A brief sound indicates that the shutter has been activated.
Image 6-3
The image can also be frozen using the FREEZE key on the RCU

6.4 Standby Timer

Purpose of the Standby Timer
If there is no signal, and the standby timer is enabled, a dialogbox is displayed and the projector will shut down after a determined
time.
48 R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002