Language; Quick Access Keys - Barco BARCOIQ GRAPHICS 200L Owner's Manual

12. Installation menu
The show native resolution function on the other hand forces to use the native resolution of the source, see
Show native resolution, page 58
The Full screen representation function overrules the show native resolution function.

12.6Language

List of languages
The list of selectable languages is depending on the software of the projector.
How to change the orientation ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Language
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired language (image 12-11)
7. Press ENTER
The language is adapted and a black bullet shows the active configuration.
Image 12-11

12.7Quick access keys

What can be done ?
The 3 function keys on top of the RCU can be associated with a particular item in one of the menus.
Each function which is not password protected or does not have a key on the RCU can associated to a function key.
How to get an overview of the quick access keys ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Quick access keys (image 12-12)
5. Press ENTER
A textbox appears on the screen.
100 R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002