Filmmode Detection; Input Balance - Barco BARCOIQ GRAPHICS 200L Owner's Manual

Image 7-10
Image 7-11

7.7 Filmmode detection

What can be done ?
Some sources like common DVD material are derived from cinema 24 Hz sources (2/2 or 3/2 pull down method).
The filmmode detection insures that these converted signals are shown without artefacts.
This function may cause undesired effects on standard sources, therefore it can be disabled (OFF) at any time
Enabling/disabling the filmmode detection
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Filmmode detection
5. Press → to pull down the menu
6. Use ↓ or ↑ to enable or disable the Filmmode detection
7. Press ENTER
A white bullet shows the active setting (image 7-12)
Image 7-12

7.8 Input balance

Purpose
The input balance is normally correctly adjusted in the factory. But due to signal distribution or signal transmission, a color imbalance
can be the result. This imbalance can be adjusted source by source for color critical applications. These adjustments influence only
the actual custom adjustment file.
The input balance consists of :
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
7. Image Menu
61