Barco BARCOIQ GRAPHICS 200L Owner's Manual page 121

GLOSSARY
AGC
Automatic Gain Control: allows an automatic amplitude (gain) control of the incoming video signal
ANSI 73.11
American power plug to connect the power cord to the wall outlet.
CEE7
European power plug to connect the power cord to the wall outlet.
Common address
Default address. Projector will always execute the command coming from a RCU programmed with that common address.
Component Video
In Component Video the term component describes a number of elements that are needed to make up the video picture, these
components are PR/Y/PB. A composite video signal on the other had contains all the information needed for the color picture in a
single channel of information
DVI
Digital Visual Interface is a display interface developed in response to the proliferation of digital flat panel displays. It uses a high
speed serial interface with TMDS (Transition Minimized differential signalling) to send data to the display.
DVI can be single or dual link.
Graphics
Native resolution of the LCD panels = 1024 pixels x 768 pixels (4:3)
PiP
PiP stands for "Picture in Picture" and allows to display multiple windows containing each of them an image. It allows to display up
to 4 different windows coming from 2 data and 2 video sources.
Projector address
Address installed in the projector to be individually controlled.
Reality
Native resolution of the LCD panels = 1366 pixels x 1024 pixels (4:3)
SDI
Serial Digital Interface
Video Selector
The Video Selector is a graphical interface which allows an overview of the different video inputs (Composite Video and S-Video)
and whether they are active (signal connected) or not as well as the selection of these different signals.
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
Glossary
115