Projector Address - Barco BARCOIQ GRAPHICS 200L Owner's Manual

The following parameters can be adjusted:
• Zoom
• Focus
• Shift
How to Zoom/focus or shift ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Lens adjustment (image 12-2)
5. Press ENTER
A textbox appears on the screen, follow the instructions. (image 12-3, image 12-4)
Image 12-2
Image 12-3

12.3Projector address

What can be done ?
In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors.
The projector address setting on the projector must match the setting on the RCU.
What can be changed ?
Within the 'Change Projector Address' menu, the following items can be changed
• Projector address: address defined by the user, may be from 0 to 255
• Common address : address may be 0 or 1
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
Image 12-4
12. Installation menu
97