Lens Installation; Removing The Lens - Barco BARCOIQ GRAPHICS 200L Owner's Manual

2. Installation Guidelines
2.4.3

Lens installation

How to install ?
1. Take the lens out of its packing material
2. Slide the lensdoor to the left (image 2-4)
3. Fix the lens by placing it in the housing
Note: In case of a motorized lens the female jack must be in front of the male jack located in the upper-left part of the housing
in the projector (image 2-5)
4. Push carefully to lock the lens in the housing
5. Slide back the lensdoor to the right
Image 2-4
2.4.4

Removing the lens

How to remove the lens ?
1. Slide the lens door to the left.
2. Unlock the lens by pulling the handle located on the right side of the projector (image 2-6)
3. Remove the lens out of its housing
Image 2-6
14
Image 2-5
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002