Barco BARCOIQ GRAPHICS 200L Owner's Manual page 39

Image 4-3
Lamp runtime management
A single mode
B dual mode
x maximum lamp runtime
Image 4-4
warning message in case of an iQ300 projector
This warning message will be repeated at the next start up. Press BACK or MENU to remove the message.
The total lifetime of the lamp for a safe operation is "x" hours max, do not use it longer. Always replace with a same type of lamp.
Call a BARCO authorized service technician for lamp replacement.
BarcoIQ
200L
300
400
Table 4-3
Maximum runtime for the different BarcoIQ projectors
When the lamp runtime reaches "x" hours the projector switches automatically to the other lamp, being lamp2.. following messages
are displayed during and after switching.
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
x ( Max lamp runtime, in hours)
6000
1500
1000
4. Getting started
33