Barco BARCOIQ GRAPHICS 200L Owner's Manual page 86

9. Signal Menu
How to change the background ?
1. Press MENU to activate the Toolbar
2. Press → to select the Signal item
3. Press ↓ to Pull down the Signal menu
4. Use ↑ or ↓ to select Background
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired background (image 9-4)
7. Press ENTER
Image 9-4
The logo display is only possible in the full screen mode, a logo can thus not be displayed (rescaled) in a
window in the PiP mode.
When there is no signal connected, the projector will also start its standby timer countdown (if enabled) and
shuts down after the predetermined time.
80 R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002