Pip Add Window; Pip Remove Window - Barco BARCOIQ GRAPHICS 200L Owner's Manual

8. Tools Menu

8.4 PiP add window

What can be done ?
It is possible to add a window to the existing windows (maximum 4), therefore a source must be selected.
Sources which are already used are unselectable. If for instance the PiP layout contains a component video then component video
will be unselectable.
Once added, the window may be altered in several ways to meet particular needs:
• repositioning
• resizing
• changing the order
How to add a window ?
1. Press MENU to activate the Toolbar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select PiP add window
5. Press ENTER
The source selection menu is displayed (image 8-5)
In the lower part of the screen appears a wizard in 4 steps (image 8-6)
Image 8-5

8.5 PiP remove window

How to remove a window ?
1. Press MENU to activate the Toolbar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select PiP remove window (image 8-7)
5. Press ENTER
In the lower part of the screen appears a wizard in 4 steps. (image 8-8)
The selected window appears surrounded with a white frame, each hit on PiP ADJUST will move the frame along the different
windows.
70
Image 8-6
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002