Barco BARCOIQ GRAPHICS 200L Owner's Manual page 95

How to edit a file ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select Edit (image 11-3)
5. Press ENTER
A dialogbox is displayed
6. Use ↑ or ↓ to select the desired file
Note: If in PiP mode the cursor is placed by default on the active file which has the focus.
7. Press ENTER
A dialogbox is displayed (image 11-4)
8. Press ENTER
A dialogbox is displayed (image 11-5)
9. Use ←or →, the numeric keys on the remote, or the keypad to edit and change the values, confirm with ENTER
Note: greyed out fields can not be updated (total pixels)
Image 11-3
Image 11-5
Which items can be adjusted ?
The following items can be adjusted :
• Active horizontal pixels
Horizontal start in pixels
•
• Horizontal period in ns
• Active vertical lines
• Vertical start in lines
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
11. Image files menu
Image 11-4
89