7. Image Menu
These calibrated presets can be selected and will provide optimum color tracking, the projector allows however the setting of a
personal color temperature, this is done in custom
How to select a preset color temperature ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Color temperature
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired preset color temperature
7. Press ENTER
The color temperature of the image is adapted and a white bullet shows the active setting. (image 7-8)
Image 7-8
How to start up the custom color temperature ?
1. Press MENU to activate the Toolbar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Color temperature
5. Press → to pull down the menu
6. Use ↓ or ↑ to select custom
7. Press ENTER
A sliderbox for the red custom setting is displayed as well as a wizard textbox in the lower part of the screen. (image 7-9,
image 7-10)
Follow the instructions on the wizard textbox. (image 7-11)
Image 7-9
60
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002