Using The Rcu - Barco BARCOIQ GRAPHICS 200L Owner's Manual

Quick zoom/focus adjustment
1. Press LENS ZOOM or
LENS FOCUS on the RCU
2. Use the arrow keys to adjust
Quick shift adjustment
1. Press LENS SHIFT
2. Use the arrow keys to adjust
4.5.2

Using the RCU

Pointing to a reflective screen
1. Point the front of the RCU to the reflective screen surface. (image 4-9)
Image 4-9
When using the remote control, make sure you are within the effective operating distance.
The operating distance may be up to 15 m (50ft).
The remote control unit will not function properly if strong light strikes the sensor window or if there are
obstacles between the remote control and the IR sensor.
Specifications
U = 9V
in
I = 80 mA
max
Internal IR receivers can be disabled:
• mono jack : on plug in of the jack
• stereo jack : on plug in or using an external switch bringing the right channel (B) to ground level.
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002
4. Getting started
35