Barco BARCOIQ GRAPHICS 200L Owner's Manual page 104

12. Installation menu
How to change the projector's RC5 address ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Projector address (image 12-5)
5. Press ENTER
A dialogbox appears on the screen. (image 12-6, image 12-7)
Image 12-5
Image 12-6
Entering the new projector address ?
1. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0 and 255.
How to change the common RC5 address ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Projector address, image 12-5
5. Press ENTER
A dialogbox appears on the screen. (image 12-8, image 12-9)
Image 12-8
98
Image 12-7
Image 12-9
R5976367 BARCOIQ GRAPHICS/REALITY 200L/300/400 10062002