Ethernet Interface; Hardware, Interface - MICRO-EPSILON combiSENSOR 64x0 Instruction Manual

Ethernet Interface

6.
You will achieve especially high resolutions if you readout the measurements in digital form via the Ethernet
interface.
For that purpose. use the web interface or a special program. MICRO-EPSILON supports you by the driver
MEDAQLib, containing all commands for combiSENSOR 64x0. You will find more details on the enclosed CD
or on the Internet: www.micro-epsilon.de/software "Standard applications > MEDAQlib".
6.1
The data logging of all channels is synchronous.
For a connection with the combiSENSOR 64x0 you will require a defined IP address of the network interface
card inside the PC. Go to
connection. For more information, contact your network administrator.
Fig. 18 LAN connection of a PC
combiSENSOR 64x0
Ethernet Interface

Hardware, Interface

Connect the combiSENSOR 64x0 to an available Ethernet interface at the PC. Use a crossover cable.
Control Panel\Network Connections.
Set up, if applicable, a new LAN
Page 31