Ethernet Interface; Hardware, Interface - MICRO-EPSILON capaNCDT 6222 Operating Instructions Manual

Ethernet Interface

6.
You will achieve especially high resolutions if you readout the measurements in digital form via the Ethernet
interface.
For that purpose. use the web interface or a special program. MICRO-EPSILON supports you by the driver
MEDAQLib, containing all commands for capaNCDT 6222. You will find more details on the enclosed CD or
on the Internet: www.micro-epsilon.de/software "Standard applications > MEDAQlib".
6.1
The data logging of all channels is synchronous.
For a connection with the capaNCDT 6222 you will require a defined IP address of the network interface card
inside the PC. Go to Control Panel\Network Connections. Set up, if applicable, a new LAN connec-
tion. For more information, contact your network administrator.
Fig. 20 LAN connection of a PC
capaNCDT 6222
Ethernet Interface

Hardware, Interface

Connect the capaNCDT 6222 to an available Ethernet interface at the PC. Use a crossover cable.
Page 48