Mercedes-Benz Sprinter 2018 Operating Instructions Manual page 98

96
Light and vision
1
Light lens
2
Screws
3
Rear fog light
4
Licence plate lighting
5
Reversing light
6
Turn signal indicator
7
Clearance lamp
8
Brake light
9
Taillight
Switch off the lighting system.
#
Unscrew the screws
#
lens 2.
Remove the plug connector from the lamp
#
carrier.
Gently turn the bulb anti-clockwise and take it
#
out of the socket.
Insert the new bulb into the socket and turn it
#
clockwise.
Position the light lens
#
screws 1.
Replacing bulbs in additional lamps
Side marker lamps
Requirements:
Side marker lamps: light bulb type LED
R
1 and remove the light
2 and tighten the
Switch off the lighting system.
#
Position a screwdriver, for example, at the
#
side and carefully lever off side marker lamp
1 in the direction of the arrow.
Remove plug 2 from side marker lamp
#
the direction of the arrow.
Connect the new side marker lamp with the
#
plug.
Position the side marker lamp on the left and
#
press in.
The side marker lamp engages audibly.
Replacing interior light bulbs
Replacing rear interior lamps
Requirements:
%
For the standard bulb failure indicator func‐
tion to work correctly, only lights bulbs must
be used that are the same type and power as
those installed during production.
Switch off the interior lighting.
#
1 in