Mercedes-Benz Sprinter 2018 Operating Instructions Manual page 245

Tap or press on the control element.
#
To take account of an area for the route:
#
select an area from the list.
Activate Avoid area.
#
The display button is activated.
If route guidance is active, a new route is cal‐
culated.
If there is no route yet, the setting is carried
over to the next route guidance.
The route can include an area that is to be
avoided in the following cases:
the destination is located in an area that
R
is to be avoided.
the route includes motorways or multi-
R
lane expressways which pass through an
area to be avoided.
there is no sensible alternative route.
R
Deleting an area
Multimedia system:
© Navigation
4 5
Advanced Route
5 5
Avoid areas
5
To delete an area: select an area in the list.
#
Select Delete.
#
Confirm the prompt with Yes.
#
To delete all areas: if at least two areas to
#
avoid are set, select
Confirm the prompt with Yes.
#
Overview of updating the map data
Updating at the Mercedes-Benz service
centre
The digital maps generated by the map software
become outdated in the same way as conven‐
tional road maps. Optimal route guidance can
only be provided by the navigation system in con‐
junction with the most up-to-date map data.
Information about new versions of the digital map
can be obtained from a Mercedes-Benz service
centre.
You can receive updates to the digital map there.
Online map update
The online map update service from Mercedes
PRO connect can be used to update the map
data.
This service is not available in all countries.
Z
5
Avoid options
5
Delete all.
MBUX multimedia system 243
You can use the following update options:
For one region (automatic map update)
R
For automatic map updates the
online updates system setting must be activa‐
ted ( page 218).
/
For several or all regions (manual map
R
update)
The map data will first be downloaded onto a
storage medium and then updated on the
multimedia system.
Further information on the online map update
http://www.mercedes.pro.
Overview of map data
Your vehicle is supplied with map data at the fac‐
tory. Depending on the country, map data for
your region is either pre-installed or the map data
is supplied on a data storage medium.
If the map data on your vehicle has been installed
at the factory and you wish to reinstall it, you do
not need to enter the activation code.
For map data that you have purchased in the
form of a data storage medium, you must enter
the accompanying activation code.
%
If you save the map data on a data storage
medium with the online map update service,
no entry is required. The activation code is
stored on the data storage medium during
the downloading process.
Observe the following when entering the activa‐
tion code:
The activation code can be used for one vehi‐
R
cle
The activation code is not transferable
R
The activation code has six digits
R
In the event of the following problems, please
contact a Mercedes-Benz service centre:
The multimedia system does not accept the
R
activation code
You have lost the activation code
R
Displaying the compass
Multimedia system:
© Navigation
4 5
Select Compass.
#
The compass display shows the following
information:
the current direction of travel with bearing
R
(360° format) and compass direction
Automatic
¡
Position
5 5