Mercedes-Benz Sprinter 2018 Operating Instructions Manual page 158

156 Driving and parking
Autonomous braking function
The autonomous braking function may intervene at speeds starting from approximately 7 km/h
in the following situations:
Vehicles travel‐ Stationary vehi‐
ling in front cles
Up to approx. Up to approx.
250 km/h 200 km/h
Situation-dependent braking assistance
Situation-dependent braking assistance may intervene at speeds starting from approximately
7 km/h in the following situations:
Vehicles travel‐ Stationary vehi‐
ling in front cles
Up to approx. Up to approx.
250 km/h 80 km/h
Cancelling a brake application of Active Brake
Assist
You can cancel a brake application of Active
Brake Assist at any time by:
Fully depressing the accelerator pedal or with
R
kickdown.
Fully releasing the brake pedal (only during
R
situation-dependent braking assistance).
Active Brake Assist may cancel the brake applica‐
tion when one of the following conditions is fulfil‐
led:
You manoeuvre to avoid the obstacle.
R
There is no longer a risk of collision.
R
An obstacle is no longer detected in front of
R
your vehicle.
System limitations
The system may be impaired or may not function
in the following situations:
The sensors are affected by snow, rain, fog or
R
heavy spray.
The sensors are dirty, misted up, damaged or
R
covered.
The sensors are affected by interference from
R
other radar sources, e.g. strong radar reflec‐
tions in multi-storey car parks.
If a loss of tyre pressure or a defective tyre
R
has been detected and displayed.
Crossing vehi‐ Crossing pedes‐
cles trians/cyclists
No reaction Up to approx.
60 km/h
Crossing vehi‐ Crossing pedes‐
cles trians/cyclists
No reaction Up to approx.
60 km/h
Full system performance is not available for a
R
few seconds after switching on the ignition or
after driving off.
The system may not react correctly in the follow‐
ing situations:
In complex traffic situations, objects may not
R
always be clearly detected.
Pedestrians or vehicles move quickly into the
R
detection range of the sensors.
Pedestrians are obscured by other objects.
R
In bends with a narrow radius.
R
Setting Active Brake Assist
Requirements:
The ignition is switched on
R
Multimedia system:
©
4
Active Brake Assist
5
The following settings are available:
Early
R
Medium
R
Late
R
Select a setting.
#
The Medium
every time the engine is started.
Stationary
pedestrians
No reaction
Stationary
pedestrians
No reaction
Settings Assistance
5 5
setting is selected automatically