Mercedes-Benz Sprinter 2018 Operating Instructions Manual page 72

70
Seats and stowage
Adjust the seat into the desired position.
#
Press memory button M together with one of
#
the preset position buttons 1, 2 or 3.
An acoustic signal sounds. The settings are
stored.
To call up: press and hold the relevant preset
#
position button 1, 2 or 3 until the front seat is
in the stored position.
Rotating the front seats
& WARNING Risk of injury or death if the
driver's seat and co-driver's seat are not
engaged
If the driver's‑ and co-driver's seats are not
engaged in the direction of travel during the
trip, the restraint systems cannot offer pro‐
tection as intended.
Engage the driver's‑ and co-driver's seat
#
in the direction of travel before the
engine is started.
& WARNING Risk of injury through adjust‐
ing vehicle settings while the vehicle is in
motion
You could lose control of the vehicle in the
following situations:
if you adjust the driver's seat, the head
R
restraints, the steering wheel or the mir‐
ror while the vehicle is in motion
if you fasten your seat belt while the vehi‐
R
cle is in motion
Before starting the engine: adjust the
#
driver's seat, the head restraints, the
steering wheel or the mirror and fasten
your seat belt.
You can rotate the driver's and front passenger
seat 50 ° and 180 °. The seats engage both in
and opposite to the direction of travel as well as
at 50 ° to the exit.
Ensure that the parking brake is applied and
#
the brake lever is folded downwards as far as
it will go ( page 147).
/
Adjust the steering wheel in such a way that
#
there is sufficient free space to rotate and
adjust the driver's seat (
Slide the front passenger seat forward before
#
rotating it ( page 64).
/
To rotate the seat: push lever
#
the vehicle centre and rotate the seat slightly
inwards.
The rotation device is unlocked.
Release lever 1 again.
#
Rotate the seat by around 50 ° outwards or
#
inwards into the required position.
page 76).
/
1 towards