To prevent the electric parking brake from apply‐
ing automatically, pull switch 1.
The electric parking brake is also automatically
applied if Active Distance Assist DISTRONIC has
brought the vehicle to a standstill.
In addition, at least one of the following condi‐
tions must be fulfilled:
the engine is switched off
R
the driver is not sitting in the driver's seat
R
the belt buckle is undone
R
there is a system malfunction
R
the power supply is insufficient
R
the vehicle is stationary for a long time
R
The red ! indicator lamp in the instrument
display lights up. The electric parking brake is
only actually applied when the red ! indicator
lamp lights up continuously.
Vehicles with manual transmission:
The electric parking brake is automatically
applied if at least one of the following conditions
has been fulfilled:
the engine is switched off
R
the driver leaves the driver's seat
R
the belt buckle is undone
R
Driving and parking 149
To prevent the electric parking brake from apply‐
ing automatically, pull switch 1.
Releasing the electric parking brake automat‐
ically
Vehicles with automatic transmission:
The electric parking brake of your vehicle is
released when all of the following conditions are
fulfilled:
The driver is sitting in the driver's seat.
R
The driver is belted.
R
The engine is running.
R
The transmission is in position h or k and
R
you depress the accelerator
or
you switch from transmission position j to
position h or k. You must also depress the
accelerator if travelling on steep uphill gradi‐
ents.
If the transmission is in position k, the rear
R
doors must be closed.
Vehicles with manual transmission:
The electric parking brake of your vehicle is
released when all of the following conditions are
fulfilled:
The driver is sitting in the driver's seat.
R
The driver is belted.
R
The engine is running.
R
A gear is engaged.
R
You release the clutch pedal and depress the
R
accelerator pedal at the same time.
When reverse gear is selected, the rear doors
R
must be closed.