Mercedes-Benz Sprinter 2018 Operating Instructions Manual page 48

46
Opening and closing
Do not keep the key together with electronic devi‐
ces or metallic objects. This can affect the key's
functionality.
%
If the battery check lamp does not light up
when you press the % or & button, the
battery is discharged.
Replace the key battery (
Activating/deactivating the acoustic locking
verification signal
Multimedia system:
© Settings
4 5
Switch Acoustic lock
#
% Please note:
The selected setting for the acoustic locking
verification signal must comply with the rele‐
vant national road and traffic regulations. In
some countries, including Germany, using the
acoustic locking verification signal is forbid‐
den by traffic laws (in accordance with §16
Para. 1 and §30 Para. 1 of the German
national road traffic regulations). The driver
of the vehicle must comply with these regula‐
tions. In countries where the use of this func‐
tion is forbidden, this function is not activa‐
ted in the vehicle and must not be activated.
Changing the unlocking settings
The key has the following adjustable unlocking
functions:
unlock centrally
R
unlock driver's and co-driver door (panel van)
R
unlock driver's door (crewbus, chassis ver‐
R
sion)
To switch between the settings: press and
#
hold the % and & buttons at the same
time for approximately six seconds until the
battery indicator lamp flashes twice.
When the locking function is selected for the driv‐
er's door or the driver's and co-driver door:
pressing the % button a second time
R
unlocks the vehicle centrally
Reducing the energy consumption of the key
If you do not use the vehicle or a key for an exten‐
ded period, you may deactivate the KEYLESS
START function of the key.
page 46).
/
Vehicle
5
on or off.
To deactivate: press the & button on the
#
key twice in quick succession.
The battery indicator lamp on the key lights
up twice quickly and once for longer.
To activate: press any button on the key.
#
When starting the vehicle with the key in the slot
in the shift console, the key functions are activa‐
ted automatically.
Removing and inserting the emergency key
element
To remove: press release button 2.
#
Emergency key element
out.
Pull emergency key element
#
pletely.
To insert: press release button 2.
#
Slide emergency key element
#
pletely until it engages.
Replacing the key battery
& DANGER Serious damage to health
caused by swallowing batteries
Batteries contain toxic and corrosive substan‐
ces. Swallowing batteries may cause serious
damage to health.
There is a risk of fatal injury.
Keep batteries out of the reach of chil‐
#
dren.
If batteries are swallowed, seek medical
#
attention immediately.
1 is pushed slightly
1 out com‐
1 in com‐