Mercedes-Benz Sprinter 2018 Operating Instructions Manual page 219

If a language is not available, the navigation
announcements will be in English.
Setting the system language
Multimedia system:
© Settings
4 5
Language
5
Set the language.
#
%
If you are using Arabic map data, the text
information can also be shown in Arabic on
the navigation map. To do so, select
the language from the language list. Naviga‐
tion announcements are then also made in
Arabic.
Setting the distance unit
Multimedia system:
© System
4 5
Select km or mi.
#
In the multifunction display of the instrument
#
display, switch the Additional speedometer
display on.
Data import and data export
Data import/export function
The following functions are possible:
transfer data from one system or vehicle to
R
another system or vehicle.
make a backup copy of your personal data
R
and load it again.
protect your personal data against unwanted
R
export with PIN protection.
%
Please note that the NTFS file system is not
supported. The FAT32 file system is recom‐
mended.
Importing/exporting data
* NOTE Loss of data due to premature
removal
Do not remove the data storage medium
#
when data is being exported.
Mercedes-Benz is not liable for any loss of
data.
Requirements:
The vehicle is stationary.
R
The ignition is switched on
R
System
5
‫العربية‬ as
Units
5
MBUX multimedia system 217
A USB device is connected .
R
Multimedia system:
© System
4 5
Select Import data or
#
Importing
Select a data storage medium.
#
A prompt appears asking whether you really
wish to overwrite the current data. If data
originates from another vehicle, this is recog‐
nised during data reading.
The multimedia system is restarted once the
data has been imported.
%
Current vehicle settings can be edited after
the import.
Exporting
If PIN protection is activated, your PIN is reques‐
ted.
Enter the four-digit PIN.
#
Select a data storage medium.
#
The data is exported. The data export may
take several minutes.
%
After successful export, the data is saved in
the "MyMercedesBackup" directory which
can be found on the storage medium.
Activating/deactivating PIN protection
Multimedia system:
© Settings
4 5
PIN protection
5
Setting the PIN
Select Set PIN.
#
Enter a four-digit PIN.
#
Enter the four-digit PIN again.
#
If both PINs match, PIN protection is active.
Changing the PIN
Select Change settings.
#
Enter the current PIN.
#
Select Change PIN.
#
Set a new PIN.
#
Activating PIN protection for data export
Select Change settings.
#
Confirm with the PIN.
#
Select Protect data
#
Activate or deactivate the function.
#
System backup
5
Export data.
System
5
export.