Mercedes-Benz Sprinter 2018 Operating Instructions Manual page 114

112 Climate control
Press the 4 button.
#
Set the minutes with button
#
Press the 4 button.
#
Setting the time format
Press button 1 or
#
the menu bar 2.
Press the 4 button.
#
Press button 1 or
#
the time format flashes.
Press the 4 button.
#
Select the desired time format using button
#
1 or 3.
Press the 4 button.
#
Setting the day
Press button 1 or
#
the menu bar 2.
Press the 4 button.
#
Press the 1 or 3
#
for the day flashes.
Press the 4 button.
#
Use the 1 or 3 button to select the
#
required day of the week.
Press the 4 button.
#
Switching immediate heating mode on/off
To switch on: press button
#
flashes on menu bar 2.
On briefly appears on the display and then
the remaining operating duration or the à
symbol for continuous operation.
To switch on: press button
#
appears on the display.
Setting the departure time
You can set three departure times with the switch
clock. Following malfunctions or if the battery
Problems with the auxiliary warm-air heater
Problem
The message ERROR
appears on the switch
clock's display.
The message INIT
appears on the switch
clock's display.
1 or 3.
3 until 4 flashes on
3 until the symbol for
3 until 4 flashes on
button until the symbol
4 until y
4 until Off
Possible causes/consequences and
A malfunction has occurred.
Have the auxiliary heating checked at a qualified specialist work‐
#
shop.
The power supply has been interrupted. All saved settings have been
deleted.
Automatic hardware detection is currently active.
has been disconnected, you will need to re-set
the departure times.
To set the departure time: press the
#
3 button until j flashes on the
row.
Press the 4 button.
#
The numbers of the program memories are
shown in the program column 5. The tick
denotes activated program memories.
Use the 1 or 3 button to select the
#
required program memory.
Press the 4 button.
#
To activate/deactivate program memo‐
#
ries: use the 1 or
Off.
Press button 4.
#
To edit the program memory: use the
#
3 button to select 4.
Press the 4 button.
#
Set the day of the week and the time
#
( page 111).
/
Setting the temperature and operating dura‐
tion
Press the 4 button.
#
Set the temperature with button
#
Press the 4 button.
#
Set the operating duration with button
#
3 or select the à symbol for continuous
operation.
Press the 4 button.
#
%
The operating duration set is the default set‐
ting for immediate heating mode. You can set
the operating duration within a range of 10 to
120 minutes or to continuous operation.
Solutions
M
1 or
2 menu
3 button to select On
1
1 or 3.
1 or
or
or