Ftp Client Settings; Dns Settings; Response Monitoring Timer - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

■Response Monitoring Timer

Set the monitoring time for a response from the CPU module after the Ethernet-equipped module receives the request data
from the external device and requests the CPU module for read/write.
It is recommended to use the default value (5s) for this timer value as much as possible.
When changing the setting value, determine the response monitoring timer value upon consulting with the system
administrator.
Set a value within the following range.
Unit
s
ms

FTP Client Settings

Set the file transfer function (FTP client).
Item
To Use or Not to Use FTP Client Settings
FTP Server Specification
FTP Server Name
FTP Server IP Address
Login Name
Password
Connection Method
Port No.

DNS Settings

Set the IP address of the DNS server.
Set the IP address in the following cases.
• When "FTP Server Specification" in "FTP Client Settings" is set to "FTP Server Name"
• When the FTP server is specified with the server name for the data logging file transfer function.
Item
To Use or Not to Use DNS Server Settings
DNS Server 1 Address
DNS Server 2 Address
When "To Use or Not to Use DNS Server Settings" is set to "Use", set either one or both "DNS Server 1
Address" and "DNS Server 2 Address".
Setting range
1 to 16383
100 to 16383000 (in increments of 100ms)
Description
Set whether to use the file transfer function (FTP client) or not.
Set the specification method of the FTP server.
Set the FTP server name (domain name) of the connection destination.
Set the IP address of the FTP server of the connection destination in
the decimal format.
Set the login name for login to the FTP server.
Set the password for login to the FTP server.
Set the connection method of the FTP server.
Set the port number for control of the FTP server.
Description
Set whether to use the DNS server or not.
Set the IP address of the DNS server 1 in the decimal format.
Set the IP address of the DNS server 2 in the decimal format.
Setting range
• Not Use
• Use
(Default: Not Use)
• FTP Server Name
• FTP Server IP Address
(Default: FTP Server Name)
1 to 256 characters
0.0.0.1 to 223.255.255.254
1 to 32 characters
0 to 32 characters
• PORT Mode
• PASV Mode
(Default: PORT Mode)
1 to 65535
(Default: 21)
Setting range
• Not Use
• Use
(Default: Not Use)
0.0.0.1 to 223.255.255.254
0.0.0.1 to 223.255.255.254
2 PARAMETER SETTINGS
2.3 Application Settings
2
253