Latency Time - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Latency Time

By setting the latency time, the start timing in the communications can be switched in the following cases.
• To prevent an error due to the overlap of the start timing in the communications
• To start communications after the communication destination is ready for the communications
During the latency time, "Preparing" is indicated in the communication status.
Communications at a specified execution interval (when "Fixed" is set for the communication setting) is
ignored during the latency time.
1 FUNCTIONS
188
1.14 Simple CPU Communication Function (CPU Module (Built-in Ethernet Port Part))