Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 281

Item
Comment
*1 When the communication destination is an "SLMP-compatible device (QnA-compatible 3E frame)", the value is fixed at 65535ms.
*2 When the communication destination is an "SLMP-compatible device (QnA-compatible 3E frame)", the value is fixed at 0.
Communication Destination Setting
The following table lists the communication destination setting specified for the simple CPU communication.
Item
Device Type
IP Address
Port No.
Host Station Port No.
Description
Sets a comment for the setting number, if required.
Description
Specify the device type of the communication destination.
Enter the IP address of the communication destination.
Set the port number of the communication destination.
Set the port number of the own station.
Setting range
32 one-byte characters (16 double-
byte characters) maximum
(Default: Blank)
Setting range
• MELSEC iQ-R (built-in Ethernet)
• MELSEC iQ-F (built-in Ethernet)
• MELSEC-Q (built-in Ethernet)
• MELSEC-L (built-in Ethernet)
• SLMP-compatible device (QnA-compatible 3E
frame)
(Default: Blank)
0.0.0.1 to 223.255.255.254
(Default: Blank)
• SLMP-compatible device (QnA-compatible 3E
frame): 1 to 4999, 5010 to 65534
• Other than the above: Setting not required
(Default: Blank)
• SLMP-compatible device (QnA-compatible 3E
frame): 1 to 4999, 5010 to 65534
• Other than the above: Setting not required
(Default: Blank)
2 PARAMETER SETTINGS
2.3 Application Settings
2
279