Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 131

Command name Description
passwd-wr Function
Specification format
Example 1
Example 2
Example 3
Caution
password-unlock Function
Specification format
Example
Caution
password-lock Function
Specification format
Example
Sets the write password (file password) registered in the file transfer target file to the Ethernet-equipped module.
Shows/clears the write password set in FTP.
Use this command only when a write password is registered for the file transfer target file. The CPU module
checks the password when accessing the specified file.
quote passwd-wr [write password]
The following appears as the execution results when the command ends normally.
• When setting the write password: 200 Command successful
• When displaying the write password: 200 Write-password is "Write password"
• When clearing the write password: 200 Command successful
• When displaying the state with the write password not set: 200 Write-password is not set.
When specifying the write password (ABCD1234@efgh)
quote passwd-wr ABCD1234@efgh
When displaying the write password currently set in the FTP
quote passwd-wr
When clearing the write password currently set in the FTP
quote passwd-wr c, or quote passwd-wr C
• One write password can be set for the FTP of the Ethernet-equipped module. When the file transfer target file
changes and when a write password is registered for the change destination file, reset the write password for
the target file.
• The write password is initialized (cleared) when logging into the Ethernet-equipped module.
Specifies the remote password set for the CPU module and unlocks the password.
This command is used when FTP communication port is specified as a remote password check target port.
quote password-unlock [remote password]
• Remote password: Specifies the remote password set in the CPU module parameters.
The following appears as the execution results when the command ends normally.
200 Command Okey
The following appears when the remote password does not match.
556 Password Error
The following appears if another command is requested before the remote password is unlocked.
555 Password Locked
When specifying a remote password (123456)
quote password-unlock 123456
• If the FTP communication port is specified as a remote password check target port when logging in, the
password will be locked.
• The CPU module files can be accessed by executing this command and unlocking before starting the various
FTP operation.
• If the FTP communication port is not specified as a remote password check target port, the processing will
complete normally when the remote password is unlocked.
Locks the remote password function set for the CPU module.
This command is executed when the FTP communication port is specified as a remote password check target
port.
quote password-lock
The following appears as the execution results when the command ends normally.
200 Command Okey
When locking the remote password
quote password-lock
1 FUNCTIONS
1.9 File Transfer Function (FTP server)
1
129