When Protocol Setting Data Is Normal; When Protocol Setting Data Is Abnormal; When Executing Uini Instruction - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

■When protocol setting data is normal

Power on/reset
Ethernet-equipped module
'Predefined protocol ready'
(Un\G1901002.0)
'Predefined protocol setting
data check area'
(Un\G1901020 to Un\G1901047)

■When protocol setting data is abnormal

Power on/reset
Ethernet-equipped module
'Predefined protocol ready'
(Un\G1901002.0)
'Predefined protocol setting
data check area'
(Un\G1901020 to Un\G1901047)

When executing UINI instruction

When the RJ71EN71 network type is set to "Q Compatible Ethernet" and the UINI instruction is executed, the protocol setting
data will not be checked.
Predefined protocol ready maintains the state before the UINI instruction was executed.
Checking the protocol
setting data
Abnormal result
Checking the protocol
setting data
Normal result
Bit 0 turns on when the
check result is normal.
The number of registered protocols and information
about whether protocols have been registered are stored.
Bit 0 remains off.
The error details are stored.
1.3 Communications Using the Predefined Protocol
1
1 FUNCTIONS
49