Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 199

Communication Destination Setting
The settings differ depending on the communication destination.
Specify the protocol and own station port number for each setting to be the same as those set in the simple CPU
communication settings.
Communication destination
*3
MELSEC iQ-R (built-in Ethernet)
*3
MELSEC iQ-R (Ethernet module)
*4
MELSEC iQ-F (built-in Ethernet)
MELSEC-Q (built-in Ethernet)
MELSEC-Q (Ethernet module)
MELSEC-L (built-in Ethernet)
MELSEC-L (Ethernet module)
OMRON (CS/CJ series)
KEYENCE (KV series)
Panasonic (FP2SH series)
Panasonic (FP7 series)
YASKAWA MP3000 series
YASKAWA MP2000 series
Yokogawa FA-M3 series
SLMP-compatible device (QnA-compatible 3E
frame)
MODBUS/TCP-compatible device
*1 Since the MELSOFT connection is used for communications, no setting is required.
*2 The module has the setting by default to communicate with one device whose protocol is "UDP".
*3 Up to 64 devices can be connected to each port of the CPU module (built-in Ethernet port part) or the Ethernet module.
*4 Up to nine devices can be connected.
Target PLC No.
When the communication destination is set to "Mitsubishi iQ-R (Built-in Ethernet)" or "Mitsubishi Q (Built-in Ethernet)" and a
multiple CPU system is configured, set the "Target PLC No." of the communication destination.
Number of device points
The maximum number of points per setting is 1024 words (bit device 8192 points maximum, word device 512 points
maximum).
Set the devices within the device range specified with the parameter of the CPU module.
Necessary setting
*1

Set the following items (for the number of devices) in the "Open Setting" window.
• Protocol: "UDP"
• Open System: "MELSOFT Connection"
Refer to the manual for the programmable controller of other manufacturer to be used.
Configure the settings so that the SLMP (QnA-compatible 3E frame of the MC protocol) can be used on
the SLMP-compatible device side. ( Manual for the device used)
Set the communication data code to binary.
Set the MODBUS/TCP-compatible device to allow the use of MODBUS/TCP. ( Manual for the
device used)
1.15 Simple CPU Communication Function (RJ71EN71, RnENCPU (Network Part))
1
*2
1 FUNCTIONS
197