Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual page 89

4.
Set the network configuration as follows.
[Navigation window]  [Parameter]  [Module Information]  [RJ71EN71]  [Port 1 Module Parameter (Ethernet)] 
[Basic Settings]  [External Device Configuration]
5.
Write the set parameters to the CPU module. Then reset the CPU module or power off and on the system.
[Online]  [Write to PLC]
In this example, default values were used for parameters that are not shown above. For the parameter setting,
refer to the chapter explaining the parameters in this manual. ( Page 241 PARAMETER SETTINGS)
1 FUNCTIONS
1.5 Communications Using the Fixed Buffer
1
87