Applicable Dedicated Instructions - Mitsubishi Electric MELSEC iQ-RJ71EN71 User Manual

Ethernet
Hide thumbs Also See for MELSEC iQ-RJ71EN71:
Table of Contents

Advertisement

Setting procedure
Set "External Device Configuration" under "Basic Settings". ( Page 244 External Device Configuration)
1.
Select the external device to be connected in "Module List" and drag it to "List of devices" or "Device map area".
External device name
UDP Connection Module
Active Connection Module
Unpassive Connection Module
Fullpassive Connection Module
2.
Set "Communication Method" for the external device to "Predefined Protocol".
3.
Set the other parameters required for communication in the connection.

Applicable dedicated instructions

The dedicated instructions used for communications using the predefined protocol are shown below.
: Usable, : Not usable
Instruction
Description
GP.ECPRTCL
Executes the protocol registered with the predefined
protocol support function of the engineering tool.
SP.ECPRTCL
*1
SP.SOCCINF
Reads connection information
*1
SP.SOCCSET
Changes the communication target
*1 These instructions are the same as the instruction for the socket communications (SP.SOCCINF/SP.SOCCSET). ( MELSEC iQ-R
Programming Manual (CPU Module Instructions, Standard Functions/Function Blocks)
*2 Only the following models can be used. The supporting firmware version differs depending on the model.
 R00CPU, R01CPU, R02CPU: There are no restrictions on the version.
 Programmable controller CPUs other than the above: "29" or later
Description
Select to communicate with the external device using UDP/IP
Select to perform the open processing to the external device from the Ethernet-equipped module (Active open)
and communicate using TCP/IP.
Select to receive the open processing from an unspecified external device (Unpassive open) and communicate
using TCP/IP.
Select to receive the open processing from the specified external device (Fullpassive open) and communicate
using TCP/IP.
Availability
RJ71EN71, RnENCPU
(network part)
CPU module (CPU part for the
RnENCPU)
*2
*2
1.3 Communications Using the Predefined Protocol
1
1 FUNCTIONS
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents